{"id":2218,"date":"2022-06-22T05:17:24","date_gmt":"2022-06-22T05:17:24","guid":{"rendered":"https:\/\/cameratechy.com\/?p=2218"},"modified":"2022-06-22T05:17:26","modified_gmt":"2022-06-22T05:17:26","slug":"vicohome-camera-motion-detection-and-notifications-faq","status":"publish","type":"post","link":"https:\/\/cameratechy.com\/vicohome-camera-motion-detection-and-notifications-faq\/","title":{"rendered":"VicoHome camera motion detection and notifications FAQ"},"content":{"rendered":"\n

Why does the VicoHome camera sometimes miss motion\uff1f<\/h2>\n\n\n\n

Some users may feel it annoying that when the camera starts recording the person in the camera’s field of view has already gone. Or obviously and for sure, there is a movement in the camera’s field of view but the movement is not recorded. If you encounter the issue, here are tips for you.<\/p>\n\n\n\n

  1. Set\u00a0“Detection Sensitivity”<\/strong>\u00a0to\u00a0“High”<\/strong>. After doing that, the distance the PIR sensor can perceive will become longer. When the camera’s detection sensitivity is\u00a0“Low”<\/strong>\u00a0or\u00a0“Medium”<\/strong>, the camera will be more difficult to be triggered.
    • How to adjust sensitivity: tap the camera\u00a0“setting” icon<\/strong>\u00a0> tap\u00a0“Motion Detection”<\/strong>\u00a0> tap\u00a0“Detection Sensitivity”<\/strong>.<\/li><\/ul><\/li>
    • Ensure that the camera is connected to stable and good Wi-Fi. If your camera’s network connection is not in good condition, the cloud recordings may fail to be completed or the cloud recordings may fail to be synced to the\u00a0“Library”<\/strong>\u00a0in the app.<\/li>
    • Please note that when you install the camera about 7 feet high and 10\u00b0\uff5e15\u00b0 downwards, the motion detector will perform best. Besides, please note that the motion detector performs best for movements 5 feet to 20 feet (1.5 meters to 6 meters) from the camera.<\/li><\/ol>\n\n\n\n
      \"Why<\/figure>\n\n\n\n

      4. The motion sensor is more sensitive to movements across the camera’s field of view than movements toward or away from the camera. For the best performance, please make sure that the specific movements that you would like to monitor across the camera’s field of view.<\/p>\n\n\n\n

      \"Why<\/figure>\n\n\n\n

      If the issue still persists, please submit feedback from the app for further technical assistance.<\/p>\n\n\n\n

      Why is there a delay in VicoHome notifications?<\/h2>\n\n\n\n

      There are three steps to receive a motion event notification on your phone.<\/p>\n\n\n\n

      Step 1<\/strong> Camera detects a motion event and sends it to its cloud server on AWS;<\/p>\n\n\n\n

      Step 2<\/strong> The cloud server sends the motion event info to Apple(iOS)\/Google(Android) notification server;<\/p>\n\n\n\n

      Step 3<\/strong> Apple(iOS)\/Google(Android) notification server sends the notification to your phone, and there will be a pop-up notification on your phone.<\/p>\n\n\n\n

      Usually, all three steps will be completed within a few seconds. However, in some cases, a delay may occur at step 1 or 3<\/strong>.<\/p>\n\n\n\n

      There may be tens of seconds<\/strong> delay<\/strong> at Step 1. <\/strong>In most cases, this is due to a poor or unstable network connection. Please check and ensure that the Wi-Fi network connection is good and the camera is installed in a place with a strong Wi-Fi signal. Please also select 720p resolution (SD) for video recording to reduce streaming bandwidth.<\/p>\n\n\n\n

      There may be minutes or even tens of minutes<\/strong> delay<\/strong> at Step 3. Many external factors might cause this delay, such as Apple\/Google’s notification server, the phone’s poor or unstable network connection, etc. Most of the time, it can return to normal after a while.<\/p>\n\n\n\n

      However, for some brands of Android phones, to fix the delay, you must add our App to the battery-saving whitelist in your phone’s Settings<\/strong>. It’s because the battery management of these Android phones will kill all background running apps, causing the apps to fail to receive the notifications from Google(Android) notification server in time.<\/p>\n\n\n\n

      Why can’t I receive VicoHome notifications?<\/h2>\n\n\n\n

      The failure to receive notifications may be caused by the following reasons, please check one by one:<\/p>\n\n\n\n

      1. The VicoHome app is not granted “Notifications” permission. When the “Notifications” permission is not allowed, your phone isn’t able to receive any notifications from the VicoHome app.\u00a0Please open the Settings app on your phone > search for “VicoHome” > tap “Notifications” and enable it<\/strong>.<\/li><\/ol>\n\n\n\n
        \"Why<\/figure>\n\n\n\n

        2. The “Motion Detection” feature is not enabled. When “Motion Detection” is disabled, the camera isn’t able to be triggered by any movements, let alone notifications.\u00a0Please open the VicoHome app >\u00a0tap the camera “setting” icon > tap “Motion Detection” > enable “Motion Detection”.<\/strong><\/p>\n\n\n\n

        \"Why<\/figure>\n\n\n\n

        3. The “Notification” feature is not enabled. When “Notification” is disabled, the camera is only able to record videos of the movements but isn’t able to send notifications to your phone.\u00a0Please open the VicoHome app >\u00a0tap the camera “setting” icon > tap “Notification Setting” > enable “Notification”.<\/strong><\/p>\n\n\n\n

        \"Why<\/figure>\n\n\n\n

        4. The camera’s Wi-Fi connection or your phone’s network connection is poor or unstable. Please check and ensure that both your camera’s Wi-Fi connection and your phone’s network connection are good for receiving notifications.<\/p>\n\n\n\n

        Why does VicoHome have so many false notifications?<\/h2>\n\n\n\n

        This is how motion detection works: when the PIR sensor perceives a change in the environment, motion detection will be triggered. The change in the environment can be a moving object, light change, the alternation of hot and cold air, etc. Particularly common false triggers include trees shaking after being blown by the wind, the cold air of the air conditioning, etc. Here are tips for you to adjust:<\/p>\n\n\n\n

        1. Change the position of the camera to avoid false triggers.<\/li>
        2. Set motion detection sensitivity to “Low”<\/strong>\u00a0or “Medium”<\/strong>. After doing that, the distance the PIR sensor can detect will become shorter so that false triggers may be reduced.<\/li><\/ol>\n\n\n\n
          \"Why<\/figure>\n\n\n\n

          3. Use the “Do not disturb”<\/strong>\u00a0feature. Tap the\u00a0“bell” icon<\/strong>\u00a0on the top of the app’s homepage to enable “Do not disturb”<\/strong>. You can set not to receive notifications in the next 30 minutes\/2 hours\/12 hours.<\/p>\n\n\n\n

          \"Why<\/figure>\n\n\n\n

          4. Use the\u00a0“sleep mode”<\/strong>\u00a0feature. Tap the camera\u00a0“setting” icon\u00a0<\/strong>> tap\u00a0Sleep Setting\u00a0<\/strong>>tap\u00a0Schedule Setting\u00a0<\/strong>> tap\u00a0Add a sleep plan\u00a0<\/strong>> set the sleep period for the camera and select the date on which the sleep period will take effect. Then the camera will detect motions only in the non-sleep period. So will notifications.<\/p>\n\n\n\n

          \"Why<\/figure>\n\n\n\n

          5. Purchase the VicoHome Awareness service. Then you can set to only receive smart notifications (recognized Person\/Vehicle\/Pet\/Package). You can also set an activity zone to only receive notifications when motions are detected in the zone. Please rest assured that only unwanted notifications will be filtered, and the camera will still record any motions.<\/p>\n\n\n\n

          \"Why<\/figure>\n","protected":false},"excerpt":{"rendered":"

          Why does the VicoHome camera sometimes miss motion\uff1f Some users may feel it annoying that when the camera starts recording the person in the camera’s field of view has already gone. Or obviously and for sure, there is a movement in the camera’s field of view but the movement is not recorded. If you encounter […]<\/p>\n","protected":false},"author":1,"featured_media":2196,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[39],"tags":[],"jetpack_sharing_enabled":true,"jetpack_featured_media_url":"https:\/\/cameratechy.com\/wp-content\/uploads\/2022\/06\/VicoHome-camera.jpg","_links":{"self":[{"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/posts\/2218"}],"collection":[{"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/comments?post=2218"}],"version-history":[{"count":1,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/posts\/2218\/revisions"}],"predecessor-version":[{"id":2228,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/posts\/2218\/revisions\/2228"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/media\/2196"}],"wp:attachment":[{"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/media?parent=2218"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/categories?post=2218"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/cameratechy.com\/wp-json\/wp\/v2\/tags?post=2218"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}