You have two ways to watch MIPC cameras on your computer.
MIPC For Pc
All you need to do is visit https://www.mipcm.com/ and log in to your MIPC account and you can watch MIPC cameras.
Note: You need to add a camera to the MIPC APP before you can use it on your computer.
Add MIPC camera
MIPC For pc only supports adding networked cameras.
1. connect the camera with a network cable to a router that can access the Internet.
2. Click on the ‘+’ icon
3. Select camera type
4. Enter the ID number of the MIPC camera, which is usually found on the bottom of the camera.
5. Enter the password of the MIPC camera, the default password is admin
MIPC For Pc – LAN viewing
MIPC camera supports GUI interface, you can access the camera with a browser while the computer and camera are on the same LAN.
Access the IP address of the camera with your browser, enter the password of the camera, the default password admin or enter the password you have changed.
The web address https://www.mipcm.com/ opens to a white screen only. Useless.
it has problem recently where it shows white screen for long ever since on the 13-2-2023 and the login screen appear after like about several mins, there wasn’t any issue on that before 13-2-2023, so I am unsure if this is a new problem. I have been using this from 2020, there are some issues over the years such as after update, the KB on the top right hand was gone which sadden me because I would not know if the mipc screen would freeze or not, sometimes it freeze and got stuck, lagging which is due to sharing a network i believe, so for this blank white screen, I believe this is a recent new problem, but I can’t contact mipc staffs about this problem since they don’t have any contact or any active social media account
I am stuck on the settings screen in my LAN viewing from my PC. My screen is missing the elements that allow mw to navigate from the settings screen to the viewing (streaming or playback) screen.
My camera keeps going off line an I can’t reconnect it.
I recently got a new mac laptop and have the MIPC app sucessfully installed . The app says MIPC2. However I dont get any sound. What do I need to do?